Skip to main content

Making Mozzarella Cheese

Over at Sustainable Eats Annette had written a book called The Urban Farm Handbook
and she has a challenge going on this year. And this month challenge was dealing with Home Dairy.
Now I have chickens, I have a veggie garden, I have fruit trees and we even raise are own beef but one thing we do not have is a dairy cow or goat. Part of the challenge was to try to find somewhere local a dairy producer.
Well we have lots a dairy farmer around here but I do not know of one that sell from their farm. So I need to keep looking.
So to make my cheese I get my milk from Braum's Creamery. They do have really good milk.
I make Mozzarella cheese from their milk and I will share how I make my cheese but there is also other sites out there that give very good instructions. The cheesemaking supply company gives great instruction and that is where I have ordered what I needed.
Here is a brief summery of what I do.

 I start with a gallon of milk, I use 2%.

 You need to let your milk get to a temp of 55, which take a little while once out of the frig.

 Once the milk reach 55 degree you add citric acid that had been diluted in water add it, to the milk. Need to heat the milk up to 90 degrees.

 Remove the milk from heat and add the rennet that also been diluted in water. Let it sit for at least 5 minutes. The milk will start to curd up, look like custard.

 When it does you will cut the curd into 1 inch squares.

 Now heat the cheese curds to 105 degrees stirring very slowly at times.
When it reaches the temp you will remove the curds from the whey (liquid) and put in a colander to drain more of the liquid..  I make mine the way the cheese making company shows by putting it in the   microwave to heat to a temp of 135 degrees. That is where you will pull and stretch the cheese until smooth
You can have it shaped  as a ball or log. You can also make small balls of cheese.
You can also add Lipase Powder to give a good flavor. I purchase that from the Cheese Making company also. 
Have questions may have the answers here.

So that is it in a nut shell.
It isn't hard at all and I enjoy making cheese. Someday I would like a dairy goat and doing more.
To see others who posted  something they did on the challenge.


Comments

  1. Hi :) Visiting from the UFHC. You sure made making mozzarella sound easy, I don't know why it intimidates me so much. I would like to find a recipe that doesn't use a microwave though. Either way, your cheese looks like it turned out great.

    ReplyDelete
  2. Hi Kathleen ... I tried the mozzarella and made this little tiny ball from a 1/2 gallon. It looks like you got quite a bit more! April, I think you can skip the microwave and just use some boiling water (and thick rubber gloves).

    ReplyDelete
  3. Your cheese certainly turned out better than my first attempt but I am undaunted and will try again. My problem I suspect is impatience - what a surprise!

    ReplyDelete

Post a Comment

Welcome friends to share a thought, I enjoy reading them and will try my best to reply back by email most of the time. But if you do not hear back it's because you are a no-reply blogger.

Popular posts from this blog

How to Make a Portable Design Wall

I had wanted to get a portable design wall to take to retreats but did not want to pay the price. Looked at various pins on pinterest and took ideas from more than one to come up with my verison. It worked out great and only cost a fraction of the price. The PVC pipes, joints and 2 yards of felt cost under $22.00 My design wall is 4' x 4' which stands approximately 5 1/5' tall. For this size need 2 - 10ft length of 3/4" PVC pipe for the frame and 4ft of 1" PVC pipe for the feet Cut the 3/4" PVC into 4 - 4' section                                                                                       2 - 1' section              Cut the 1"  PVC into 4 - 1' section          The joints you'll need will be 2 - 3/4" elbows 2 - 3/4" T's 2 - 3/4" to 1" T (this will be the base of the Feet) 4 - 1" elbow Also need pipe cutters (this cost me almost as much

Yarn Along 2/20/13 Spoon Pin Doily

It's snowing here and I know some of you are tired of snow but here we will take the moisture any way we can get it. Plus it just gives me a reason to stay in and work on some of my projects. In this picture I'm not sure if you can make it out but in the background there are some wild turkeys that hang around the house sometime, just  chilling This project I'm working on is Spool Pin Doilies.   I had never heard of them before until Bonnie Hunter had mentioned it on her blog . She a had a viewer send her one for her sewing machine along with a pattern. I did not like the pattern but loved the idea so I decided to make up my own version. I wanted a more simple, smaller and fuller doily. So I tried different thread sizes to get one that I like. (From left to right) I tried sock yarn, which I'll redo because I think I like that look. Heavy weight crochet thread, nope too big Bamboo yarn, I like it. Looks good on my Kenmore. Pearl cott

What's Up

Well that is a big question, what's up Seeing how I haven't posted since before the retreat I went to. So I will show what I did at the retreat and what I have been doing these past few days, which is this Log Cabin Christmas Tree  wall hanging I have the blocks completed and now it just a matter of getting them sewn together. I'll get to that tomorrow. While at the retreat I made this baby quilt top with the disappearing 4-patch block. I had a charm pack and used some "snow" fabric Kaufman snow is one of my favorite whites to use. It's white but not a stark, bright white, goes well with a majority of the fabric I've collected. I started late making my blocks for RCS14 First I wasn't sure what pattern I wanted to make and then with all that was going on the first part of the year, I didn't start until July. One quilt is using a quarter log cabin in solid colors. I made these at the retreat, have the other half t